C 303-D / C 303-D-P

Extending the suspended range of microphones with the introduction of C303-D, Clockaudio empowers its class leading signature C303 tri-element microphone array to be available via Dante & AES67 enabled interfaces. Supporting POE, the C303-D is also capable of driving a programmable RGB LED in the ceiling rose. back rejection per element providing 360 degree pickup. Supports Dante & AES67 protocol for extended compatibility.

Includes a RGB status light in the ceiling rose (ceiling bezel) that is combinations using 10 levels of brightness per colour. 1. Remove C303-D’s top cover by undoing 4 screws (Fig A). 2. Undo the ceiling rose nut, drill a hole in the ceiling tile to fit the 16mm (21/32”) ceiling rose bolt from under the tile. 3.

Feed the C303-D unit onto the bolt from the ceiling rose (Fig B). 4. Tighten the nut onto the bolt to secure the ceiling rose and C303-D 6. Feed the microphone cable through the hole in the ceiling rose (Fig C). 7.

Adjust the cable length of the microphone and secure excess cable using the 8. Connect the audio cable from C303 microphone to the audio channel inputs 9. Affix lid down with 3 screws and supplied M3 eyebolt and washer. 10.

Attach the supplied safety harness hook to the eyebolt on top of the C303-D metal case and insert the free end of the cable through the entrance hole on 11. Attach the other end of the safety cable to a fixed secure structure capable of taking 3Kgs (7lbs), includes the weight of a ceiling tile (Fig F). 12. Connect a standard Cat5 cable to the C303-D’s RJ45 socket.