The Electret Condenser Microphone is a very low profile Boundary Layer Microphone with an Omni-Directional Polar Pattern. The microphone is constructed of brass and includes 9.9 ft (3 Metres) of screened cable. The Microphone includes a separate inline Phantom Power Adaptor which is to be powered by 9 to 48 volts.
The in-line adaptor also includes filters which will eliminate all GSM frequencies from 800-1200 MHz. Impedance 200 Ohms @ 1KHz, frequency response 50 Hz to 18 KHz +/-3dB, sensitivity -47dB +/- 3dB @ 1Khz (0dB =1V/Pa), total Harmonic Distortion (THD) at an operating level of 120dB less than 1%. The Microphone includes 4 small rubber isolation feet to help minimise the transfer of mechanical noise and vibrations from the table.
The Microphone has a non-reflective Black Nextel® or Grey Nextel® finish.
It uses a providing natural polar pattern.
Use the Data sheet button on this page for the full specification PDF, and check the Downloads tab for manuals and other documents.
Dimensions: D 75mm (2.95") x H12.5mm (0.492") with rubber feet
Our audio engineers can help you specify the perfect microphone for your installation. Get in touch for expert guidance.
