The Condenser Microphone is a through desk/ceiling/panel mount Boundary Layer design with an Omni-Directional Polar Pattern. A Red/Green Bi-Colour LED is mounted on top of the Microphone and includes associated wiring for use with an external switching unit. The Microphone is made of a brass construction and is Pre-Wired with 39” (1 metre) of cable with a female mini XLR audio termination as well as 2 bare wire leads and a shield/ground for the Bi-Colour LED.
The Microphone includes a separate Phantom Power Adaptor which accepts 9 to 48 volts DC. The Phantom Power Adaptor includes filters which will eliminate all GSM frequencies from 800- 1200MHz. and terminated with XLR connector. Frequency response 50 Hz to 18 KHz; Impedance 200 Ohms; Sensitivity -37.5dB +/- 3dB @ 1 KHz (0dB =1V/Pa); Total Harmonic Distortion (THD) at an operating level of 120dB is no greater than 1%.
Finish: Matt Black, White or Nickel.
Dimensions: L 35mm (1'.38") x W 20mm (0'.79").
Use the Data sheet button on this page for the full specification PDF, and check the Downloads tab for manuals and other documents.
The C007-RF-LED SERIES is a Condenser (back electret)
Our audio engineers can help you specify the perfect microphone for your installation. Get in touch for expert guidance.
