The Condenser Microphone is a small, low profile Boundary Layer type, with a Half-Cardioid Polar Pattern. The Microphone includes a 3m (9′.9″) of cable and is terminated with a TA3F Mini XLR connector. The Microphone is supplied with a separate in-line Phantom Power Adaptor accepting 9 to 48 volts DC, and contains a switchable 10 dB pad and bass cut filter(-4dB per octave at 400 Hz to –6dB per octave at 100 Hz); Impedance 200 Ohms; Frequency response 50 Hz to 18 KHz; Sensitivity -37.0dB +/- 3dB @ 1Khz (0db =1V/Pa); Total Harmonic Distortion (THD) at an operating level of 120db is less than 1%.
The Microphone’s base is covered with a rubber isolation pad to help minimise the transfer of mechanical noise and vibrations from tables. Finish: Black or
The C006E is a Condenser (back electret)
Termination: Mini XLR
Use the Data sheet button on this page for the full specification PDF, and check the Downloads tab for manuals and other documents.
Our audio engineers can help you specify the perfect microphone for your installation. Get in touch for expert guidance.
