The condenser microphone is a very low profile boundary layer through table design, with an omni-directional polar pattern. The microphone has a unique ability to retract and lock the capsule module away from sight leaving only 3 mm (0.12”) protruding on top of the table. The microphone is of a robust brass construction and include 2 Metres (6.6ft) of cable.
The microphone includes an integral phantom power module which is to be powered by 9 to 48 volts. The phantom power module also includes filters which will eliminate all GSM frequencies from 800-1200 MHz Impedance 200 Ohms; Frequency response 30 Hz to 20 KHz; Sensitivity -42.5dB ± 3dB @ 1KHz (0dB =1V/Pa); Total Harmonic Distortion (THD) at an operating level of 120dB is no greater than 1%. Finish: Black Nextel® or Satin Nickel.
The CRM 100-RF is a Condenser (back electret)
Available finish: Black Nextel® or Satin Nickel.
Dimensions: Above Table:15.00mm (0.59") Diameter:36.00mm (1.42") Below Table:111.00mm (4.37") Diameter:30.00mm (1.18")
It uses a Omni-Directional Frequency Response 30Hz - 20KHz polar pattern.
Our audio engineers can help you specify the perfect microphone for your installation. Get in touch for expert guidance.
